Author |
Share Topic Topic Search Topic Options
|
geewizard
Senior Member
Joined: 16 Apr 2017
Location: Spokane
Online Status: Offline
Posts: 347
|
Topic: Bowlegged Rpod Posted: 17 Aug 2017 at 9:18pm |
My wife happened to drive behind me as I towed the Pod and noticed that the tires were bowlegged (tilted out at the bottom). And also noticed that the Pod was leaning over slightly on the slide-out side. This is with the Pod empty of gear and water.
Is this normal? The axle looks straight.
|
2021 Winnebago Micro Minnie 1708FB
2017 R-Pod 177 (Blue) HRE SOLD
2004 Outfitter Apex 8 camper
2014 Toyota Tundra DC
|
|
furpod
Moderator Group - pHp
Joined: 25 Jul 2011
Location: Central KY
Online Status: Offline
Posts: 6128
|
Posted: 18 Aug 2017 at 8:08am |
If you mean the axle looks straight, as in, you looked underneath, and it runs straight and flat across the camper.. It's bad. It is supposed to have an upward arch to it.The slide side lean has been noted before. On a unloaded pod, it carries more weight on that side.
|
|
geewizard
Senior Member
Joined: 16 Apr 2017
Location: Spokane
Online Status: Offline
Posts: 347
|
Posted: 18 Aug 2017 at 8:56am |
thanks furpod. I'll measure it to see if there is an upward bow. I don't see an obvious upward bow.
|
2021 Winnebago Micro Minnie 1708FB
2017 R-Pod 177 (Blue) HRE SOLD
2004 Outfitter Apex 8 camper
2014 Toyota Tundra DC
|
|
voisj
Senior Member
Joined: 19 Jul 2016
Location: San Luis Obispo
Online Status: Offline
Posts: 471
|
Posted: 18 Aug 2017 at 10:05am |
Originally posted by geewizard
My wife happened to drive behind me as I towed the Pod and noticed that the tires were bowlegged (tilted out at the bottom). And also noticed that the Pod was leaning over slightly on the slide-out side. This is with the Pod empty of gear and water.
Is this normal? The axle looks straight.
|
You mean the tires are tilted like this /----\ ? , How much? Put something like a 2' framing square up and see. And, not to doubt wifey but You need to see this for yourself. The axle in the pod is not like a small cars independent suspension that if you load to much the tires will tilt. I think the only way they would tilt is if the axle is bent down in the middle. Mine do not tilt at all loaded or unloaded and my axle is straight. rgds John
|
SLOPODMODS
John&Sue,SLO,CA
2016 180 HRE, 2013 F150 Eco Boost
|
|
geewizard
Senior Member
Joined: 16 Apr 2017
Location: Spokane
Online Status: Offline
Posts: 347
|
Posted: 18 Aug 2017 at 11:17am |
Originally posted by voisj
Originally posted by geewizard
My wife happened to drive behind me as I towed the Pod and noticed that the tires were bowlegged (tilted out at the bottom). And also noticed that the Pod was leaning over slightly on the slide-out side. This is with the Pod empty of gear and water.
Is this normal? The axle looks straight.
|
You mean the tires are tilted like this /----\ ? , How much? Put something like a 2' framing square up and see. And, not to doubt wifey but You need to see this for yourself. The axle in the pod is not like a small cars independent suspension that if you load to much the tires will tilt. I think the only way they would tilt is if the axle is bent down in the middle. Mine do not tilt at all loaded or unloaded and my axle is straight. rgds John |
Yes, the tires are slightly tilted like this /----\ and it's with the Pod unloaded. I think it will get much more pronounced when it's normally loaded with gear and water tank full. I do understand that the Pod axle is different than a car. I measured my axle with a long carpenter's level and it is bowed UP about a 1/4" in the middle. thanks
|
2021 Winnebago Micro Minnie 1708FB
2017 R-Pod 177 (Blue) HRE SOLD
2004 Outfitter Apex 8 camper
2014 Toyota Tundra DC
|
|
furpod
Moderator Group - pHp
Joined: 25 Jul 2011
Location: Central KY
Online Status: Offline
Posts: 6128
|
Posted: 18 Aug 2017 at 2:12pm |
Use a carpenters square to make sure it's not an optical illusion. The fenders can get bent down a bit, and it will cause you to see the off angle across the tire face, but they are still square(ish) to the ground. Our Pod had this.. "issue". After "someone" sat on a fender...
|
|
voisj
Senior Member
Joined: 19 Jul 2016
Location: San Luis Obispo
Online Status: Offline
Posts: 471
|
Posted: 18 Aug 2017 at 6:09pm |
Just checked my axle. mine goes up 1/4 inch in the middle. 2016 180 with a Lippert axle
|
SLOPODMODS
John&Sue,SLO,CA
2016 180 HRE, 2013 F150 Eco Boost
|
|