Newb alert...first post here. Just got my R-Pod 172 (I call mine X-Pod) to use this winter for snowboarding trips.
This winter, I want to use my water heater to keep the freshwater tank thawed.
On another (non-R-POD) forum I saw a post where a gent said he plumbed the hot water output into the freshwater tank using a thermostat controlled valve to move hot water from the water heater to the freshwater tank to keep it thawed. The freshwater tank could be kept thawed simply with one thermostadt controlled valve. Seemed an extremely elegant solution.
I would GREATLY appreciate advice on how to plumb this in the X-Pod from you expert R-Podders to make this mod as easy as possible. Questions...
1. Where is the best location to put a T in a hot water line?
- Location near the sink faucet would pull hot water through sink line, keeping that thawed.
- Shower hot water might be closer/easier install.
- Make the extra effort, install a T at both the sink and shower.
2. Where to connect a hot water return line back into the freshwater tank (with valve in between).
Other side issues worth noting
- Will be using X-Pod most weekends, i'll keep it plugged in to home electric during the week.
- Cabin will be kept above freezing through the week while plugged in at home (and on trips)
- Will sanitize water heater.
- Gray water - I planed on dumping RV antifreeze in as we use it.
- Black Water - I plan to remove the X-Pod Toilet and put a cassett toilet in it's place for the winter.
Blackwater will be in the cabin at cabin temps.
I'm extremely open to suggestions on this as I need to get it done by Nov 14th or so. Thank you for any help!