Author |
Share Topic Topic Search Topic Options
|
Outbound
podders Helping podders - pHp
Joined: 19 Nov 2009
Location: Oshawa, Ontario
Online Status: Offline
Posts: 767
|
Topic: Circuit box cover Posted: 02 May 2014 at 3:51pm |
Originally posted by techntrek
maybe stick a small spot of velcro inside the cover? |
That's a great idea! My cover was popping open quite often last year - velcro will be the perfect fix.
|
Craig :: 2009 RP171 towed by a 2017 F150
|
![Back to Top Back to Top](forum_images/back_to_top.png) |
techntrek
Admin Group - pHp
Joined: 29 Jul 2009
Location: MD
Online Status: Offline
Posts: 9059
|
Posted: 02 May 2014 at 10:27am |
Originally posted by Bred Flink
I didn't know that it would charge a discharged battery from shore power. Thanks, that appears to be the reason for the fan running. |
For proper battery maintenance, make sure you install some type of battery disconnect (a fuse, or disconnect switch) and charge the battery every 30 days. You must disconnect the battery from the pod when the pod isn't plugged in, or the LPG detector and the fridge control board will kill the battery in a week or two. Then every month plug the pod in and and reconnect the battery, overnight.
An alternative is to leave the pod plugged in all the time, but the converter/fridge/detector are a fairly significant load over time. It would be better to buy a good "battery maintainer" for this, just be sure to disconnect the battery from the pod since ,many maintainers only have enough amperage to keep the battery charged - not enough to run the fridge and detector, too.
|
|
![Back to Top Back to Top](forum_images/back_to_top.png) |
kymooses
Senior Member
Joined: 01 Aug 2010
Location: Louisville, Ky
Online Status: Offline
Posts: 1807
|
Posted: 02 May 2014 at 10:16am |
Originally posted by Tars Tarkas
So I looked up the number for WFCO's distributor, called, John answered the phone. As soon as I said "latch" he interrupted and told me to email my address to him and he'd send me a replacement!
TT
|
Awesome! thanks for sharing this!!
|
|
![Back to Top Back to Top](forum_images/back_to_top.png) |
Bred Flink
Newbie
Joined: 02 Feb 2014
Location: Calgary alberta
Online Status: Offline
Posts: 29
|
Posted: 02 May 2014 at 12:10am |
I didn't know that it would charge a discharged battery from shore power. Thanks, that appears to be the reason for the fan running.
|
Sailing and camping Western Canada and US-NW
|
![Back to Top Back to Top](forum_images/back_to_top.png) |
CharlieM
Senior Member
Joined: 23 Nov 2012
Location: N. Colorado
Online Status: Offline
Posts: 1797
|
Posted: 01 May 2014 at 11:25pm |
The convertor does contain a small cooling fan that will run when the convertor is supplying a significant load. With no 12V appliances and no lights on the fan should not run unless it is charging a discharged battery. Make sure the fridge is not set to run on 12V. Let it charge for a day and check it. If the fan is still running there is a problem. In a very quiet environment you may be able to hear the convertor hum by putting your ear to the box or a hard surface. The convertor does run on 60Hz power and you might hear it, but you have to be quiet.
|
Charlie
Northern Colorado
OLD: 2013 RP-172, 2010 Honda Pilot 3.5L 4WD
PRESENT: 2014 Camplite 21RBS, 2013 Supercharged Tacoma 4L V6 4WD
|
![Back to Top Back to Top](forum_images/back_to_top.png) |
Bred Flink
Newbie
Joined: 02 Feb 2014
Location: Calgary alberta
Online Status: Offline
Posts: 29
|
Posted: 01 May 2014 at 10:34pm |
Now that that's solved...should a WFCO electrical panel hum? Plugged in shore power (in my backyard) to my new 2014 178 With no appliances running, there is an audible hum, like a small fan working.
|
Sailing and camping Western Canada and US-NW
|
![Back to Top Back to Top](forum_images/back_to_top.png) |
Tars Tarkas
Senior Member
Joined: 14 Jan 2013
Location: Near Nashville
Online Status: Offline
Posts: 1446
|
Posted: 01 May 2014 at 8:20pm |
So I looked up the number for WFCO's distributor, called, John answered the phone. As soon as I said "latch" he interrupted and told me to email my address to him and he'd send me a replacement!
TT
|
2010 176
FJ Cruiser
|
![Back to Top Back to Top](forum_images/back_to_top.png) |
Budward
Senior Member
Joined: 21 Apr 2014
Location: SC/NC
Online Status: Offline
Posts: 438
|
Posted: 30 Apr 2014 at 9:48pm |
I have a WFCO convertor on another camper that the latch broke on. I drilled an appropriate sized hole straight through, tapped it 6-32 and use a thumbscrew to secure.
|
![Back to Top Back to Top](forum_images/back_to_top.png) |
Tars Tarkas
Senior Member
Joined: 14 Jan 2013
Location: Near Nashville
Online Status: Offline
Posts: 1446
|
Posted: 30 Apr 2014 at 9:45pm |
Thanks for the thoughts. I don't know if velcro or duct tape is better. Best I can tell, nothing is broken, i.e., there are no apparent broken bits -- it's all there. Maybe something is worn down. I haven't tried googling the manufacturer and it may not be worth worrying about. Like a lot of things that you ought to be able to fix for > $3 this may not be fixable.
TT
|
2010 176
FJ Cruiser
|
![Back to Top Back to Top](forum_images/back_to_top.png) |
kymooses
Senior Member
Joined: 01 Aug 2010
Location: Louisville, Ky
Online Status: Offline
Posts: 1807
|
Posted: 30 Apr 2014 at 9:16pm |
Originally posted by techntrek
maybe stick a small spot of velcro inside the cover? |
Yup I think we've seen folks do the velcro trick a time or two. Ours pops open all the time, won't be long before the little clip just breaks I imagine.
|
|
![Back to Top Back to Top](forum_images/back_to_top.png) |