Author |
Share Topic Topic Search Topic Options
|
offgrid
Senior Member
Joined: 23 Jul 2018
Online Status: Offline
Posts: 5290
|
Topic: Zamp port for supplying power from the battery? Posted: 01 Oct 2020 at 6:16pm |
Originally posted by podwerkz
Originally posted by offgrid
It would be like taking all the circuit breakers out of your home panel and putting them in the receptacles instead. Not a good idea. |
You mean I need to move them all back to the panel? Dang...two weeks of hard work...wasted...
|
|
1994 Chinook Concourse
1995 RV6A Experimental Aircraft
2015 Rpod 179 - sold
|
|
mcarter
podders Helping podders - pHp
Joined: 07 Apr 2016
Location: Greenbrier, TN
Online Status: Offline
Posts: 3419
|
Posted: 01 Oct 2020 at 5:41pm |
My ZAmp is hot all the time, no fuse when connected to battery. I used it with fuse to mount a reel out service light that goes all around trailer in emergency situations. The service light is mounted inside the storage door.
|
Mike Carter
2015 178
" I had the right to remain silent, I just didn't have the ability."
|
|
TheBum
Senior Member
Joined: 26 Feb 2016
Location: Texas
Online Status: Offline
Posts: 1407
|
Posted: 01 Oct 2020 at 1:31pm |
Wow, I didn't expect such a big response. Thanks for all the input. Now I just need to find a cable to plug into the Zamp port and wire into the camera.
EDIT: I found this one on Amazon that has plenty of cable and is reasonably priced. Think it'd work?
|
Alan
2022 R-Pod 196 "RaptoRPod"
2022 Ram 1500 Lone Star 4x4
Three cats
|
|
podwerkz
Senior Member
Joined: 11 Mar 2019
Location: Texas
Online Status: Offline
Posts: 966
|
Posted: 01 Oct 2020 at 11:06am |
Originally posted by offgrid
It would be like taking all the circuit breakers out of your home panel and putting them in the receptacles instead. Not a good idea. |
You mean I need to move them all back to the panel? Dang...two weeks of hard work...wasted...
|
r・pod 171 gone but not forgotten!
|
|
offgrid
Senior Member
Joined: 23 Jul 2018
Online Status: Offline
Posts: 5290
|
Posted: 01 Oct 2020 at 7:23am |
The zamp ports are hot all the time, you can use them to run loads no problem. Please add a fuse at the battery.
Don't add the fuse at the load device. Fuses are intended to protect the wiring, they can't do that if you put them at the far end away from the source of power. It would be like taking all the circuit breakers out of your home panel and putting them in the receptacles instead. Not a good idea.
|
1994 Chinook Concourse
1995 RV6A Experimental Aircraft
2015 Rpod 179 - sold
|
|
Colt
Senior Member
Joined: 16 Nov 2019
Online Status: Offline
Posts: 383
|
Posted: 01 Oct 2020 at 1:03am |
Not sure about a fuse, but my Zamp connector is hot all the time.
|
John
'16 R-Pod 180
|
|
voisj
Senior Member
Joined: 19 Jul 2016
Location: San Luis Obispo
Online Status: Offline
Posts: 471
|
Posted: 30 Sep 2020 at 8:16pm |
I use mine as a power port for a metal porch light that I stick to the magnet on the storage door.
My wires both run directly to the battery there's no fuse on it, so I added a fuse to the wires just inside the storage door behind a small panel next to the tail light, (on a 180).
|
SLOPODMODS
John&Sue,SLO,CA
2016 180 HRE, 2013 F150 Eco Boost
|
|
JR
Senior Member
Joined: 31 Aug 2018
Location: Manistee, MI
Online Status: Offline
Posts: 364
|
Posted: 30 Sep 2020 at 7:54pm |
I have a 2019 179 and the wiring from the rear of the trailer Zamp outlet had a positive wire running to the battery positive and the negative side was wired from the Zamp outlet to the frame in the rear (behind the wheel) then the negative was wired from the frame up by the right front frame (under the trailer) to the negative side of the battery with no fuse or circuit breaker in line on either the positive or negative line. Hope this helps.
|
Jay
179/2019
|
|
GlueGuy
Senior Member
Joined: 15 May 2017
Location: N. California
Online Status: Offline
Posts: 2652
|
Posted: 30 Sep 2020 at 6:32pm |
AFAIK, it should be. There might be an inline fuse, but I don't know about that. Easy enough to check.
|
bp
2017 R-Pod 179 Hood River
2015 Ford F150 SuperCrew 4WD 3.5L Ecoboost
|
|
TheBum
Senior Member
Joined: 26 Feb 2016
Location: Texas
Online Status: Offline
Posts: 1407
|
Posted: 30 Sep 2020 at 5:59pm |
Is the Zamp port connected directly to the battery without any diodes or such inline? If so, I'm thinking about using it to power a wireless backup camera since it's close to where the camera would be mounted, it's always on (as opposed to using the power for the running lights), it's easy to disconnect, and it doesn't involve piercing the Pod's shell beyond the camera mounting holes. I'd just have to figure out how to secure the wires.
|
Alan
2022 R-Pod 196 "RaptoRPod"
2022 Ram 1500 Lone Star 4x4
Three cats
|
|