counter top laminate peeling

 I replaced the counter top in our r-pod 171 and our forest river Vibe with plywood the mdf that forest river uses doesn't work well if it gets wet. When I replaced the sink in our Gulfstream Vista cruiser I was happy to discover Gulfstream used plywood something more RV manufacturers should do.

 EchoGale you could park in marwayne's driveway with your camper that would be like living next door.

Originally posted by StephenH For laminate, contact cement is the proper glue to use. For repair of damaged spots though, that is much more difficult. When I worked at place that did a lot of laminates, contact cement was what was used. Brush it on, let it dry, then bond using the suggestions by Colt to use spacers to keep the parts apart until the contact cement dries to the right stage for bonding. The can will tell you how to use it. With contact cement, clamping is generally not needed once it is bonded. Just pressure with a good roller to make sure the laminate has made the best contact possible and all air bubbles are moved out.

If it was mine i replace the counter top with 3/4" plywood and flat work laminate with solid oak edging.

For laminate, contact cement is the proper glue to use. For repair of damaged spots though, that is much more difficult. When I worked at place that did a lot of laminates, contact cement was what was used. Brush it on, let it dry, then bond using the suggestions by Colt to use spacers to keep the parts apart until the contact cement dries to the right stage for bonding. The can will tell you how to use it. With contact cement, clamping is generally not needed once it is bonded. Just pressure with a good roller to make sure the laminate has made the best contact possible and all air bubbles are moved out.