Take care of your faucet handles!

This was the sink I installed with it:
http://www.amazon.com/gp/product/B0012C2R4W?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00

The hard part is cutting the hole. It is bigger than the stock sink. The cut close to the back wall was the hardest since I could not get a jigsaw in that close. I was able to use an oscillating tool with circular and flat blades to cut out and trim the hole to get the sink to fit. It just filled the space between the front and back shelf supports.

http://www.harborfreight.com/variable-speed-oscillating-multi-tool-61219.html

I replaced ours along with the sink with this one from Amazon:

http://www.amazon.com/gp/product/B00SCYQQOA?psc=1&redirect=true&ref_=oh_aui_detailpage_o08_s00

Here is what it looks like installed:

Our hot water handle also broke. I was planning on buying a new faucet on Amazon but my son-in-law had a brilliant idea. We turned a longer wood screw in to the faucet connection and filled the handle with epoxy. Please the handle over the screw and taped it in place for one day. It looks brand new and seems to work. We are going on our first extended trip for this year in a few weeks so we will see if it paces the test. If not, I know where to get a new faucet.

Thanks for this thread. I'll keep a close eye on the faucet. A kitchen faucet breaking on the one rainy day we actually we need it, might be one of the few things that could actually send the wife into a rage. 

mine was a '10.  Same faucet as the one shown in the pic.