Battery cables too short |
Post Reply | Page 12> |
Author | |||
Tars Tarkas
Senior Member Joined: 14 Jan 2013 Location: Near Nashville Online Status: Offline Posts: 1447 |
Topic: Battery cables too short Posted: 05 May 2016 at 10:38am |
||
For the effort and expense, you ought to at least look at new cables. As David said too, you're just creating another potential failure point and one that may be the last one you look at if you ever have to troubleshoot.
TT |
|||
2010 176
FJ Cruiser |
|||
TheBum
Senior Member Joined: 26 Feb 2016 Location: Texas Online Status: Offline Posts: 1407 |
Posted: 05 May 2016 at 10:32am | ||
A Bic lighter will work. Just be careful not to get the flame too close to the heat shrink tubing. |
|||
johnmaci
Senior Member Joined: 17 Jun 2014 Location: MD Online Status: Offline Posts: 202 |
Posted: 05 May 2016 at 8:14am | ||
I agree, but my limiting factor is that I am using an outdoor storage facility and have no access to 120v to run an iron or heat gun :(
|
|||
Keith-N-Dar
podders Helping podders - pHp Joined: 03 Apr 2011 Location: Mayville, WI Online Status: Offline Posts: 1447 |
Posted: 03 May 2016 at 6:56pm | ||
I am not a big fan of butt splices on anything mobile. I recommend a soldered sleeve with heat shrink insulation if you must extend a wire. |
|||
Keith-N-Dar
Boris & Betty (Boston Terriers) 2011 R-Pod 177 2010 Ford F-150 |
|||
johnmaci
Senior Member Joined: 17 Jun 2014 Location: MD Online Status: Offline Posts: 202 |
Posted: 03 May 2016 at 6:49pm | ||
Thank you!!!!
|
|||
sailor323
Senior Member Joined: 11 Jun 2015 Location: S Central KY Online Status: Offline Posts: 281 |
Posted: 02 May 2016 at 7:47pm | ||
Use the same gauge wire and butt splice with heat shrink butt connectors
|
|||
Guests
Guest Group |
Posted: 02 May 2016 at 7:12am | ||
An easy fix would be to go to your favorite home store (like Lowe's, Home Depot) and pick up the needed lengths of wire and some ring terminals (crimp or solder)and replace the existing. While you could splice them, it adds "points of failure/problem" and, if nothing else, looks amateurish. The positive should go to a circuit breaker near the batteries. The negative - just trace it back on your particular camper. |
|||
StephenH
podders Helping podders - pHp Joined: 29 Nov 2015 Location: Wake Forest, NC Online Status: Offline Posts: 6327 |
Posted: 01 May 2016 at 9:57pm | ||
Okay. That explains why. I hope you find a solution that won't cost much.
|
|||
StephenH
Happy is the man that findeth wisdom,... ouR escaPOD mods Former RPod 179 Current Cherokee Grey Wolf 24 JS |
|||
johnmaci
Senior Member Joined: 17 Jun 2014 Location: MD Online Status: Offline Posts: 202 |
Posted: 01 May 2016 at 8:54pm | ||
Thanks. I ended up getting a taller box, and now the cables don't reach.
|
|||
StephenH
podders Helping podders - pHp Joined: 29 Nov 2015 Location: Wake Forest, NC Online Status: Offline Posts: 6327 |
Posted: 01 May 2016 at 7:51pm | ||
You would want to use at least the same gauge of wire to extend the wires. It seems strange that just replacing the battery box would leave the cables too short. Did you move the batteries in the process?
In any case, head to your local auto parts shop. Someone there should be able to advise you on the best way to extend your cables. |
|||
StephenH
Happy is the man that findeth wisdom,... ouR escaPOD mods Former RPod 179 Current Cherokee Grey Wolf 24 JS |
|||
Post Reply | Page 12> |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |