water heater |
Post Reply | Page <123> |
Author | |
grizwalsh
Newbie Joined: 07 Apr 2018 Location: b.c Online Status: Offline Posts: 35 |
Topic: water heater Posted: 26 Sep 2018 at 7:59am |
Had to buy a $14 socket but I could only get one in 3/4 inch drive--don't have that so I almost bought a $30 ratchet till I found out you can get an adaptor for 1/2 inch--the struggle continues
|
|
grizwalsh
|
|
TheBum
Senior Member Joined: 26 Feb 2016 Location: Texas Online Status: Offline Posts: 1407 |
Posted: 26 Sep 2018 at 11:01am |
I use the same Harbor Freight torque wrench I used to set up my WDH. I don't have an extension, so I use a reducer and an expander hooked together to get the spacing I need between the 1-1/16" socket and the torque wrench. I have to be careful not to over-torque the rod.
|
|
Alan
2022 R-Pod 196 "RaptoRPod" 2022 Ram 1500 Lone Star 4x4 Three cats |
|
grizwalsh
Newbie Joined: 07 Apr 2018 Location: b.c Online Status: Offline Posts: 35 |
Posted: 26 Sep 2018 at 11:41am |
Me Again---Does anyone clean the crap off the anode rod with a wire brush or do you just replace it--mine isn't even a year old yet and I'm not sure what they're supposed to look like---Also--do you ever inspect the heating element? In my area there is a lot of calcium in the water and I have to take them out and use a wire brush on my home water heater elements |
|
grizwalsh
|
|
Ben Herman
Senior Member Joined: 26 Apr 2018 Location: Gr Junction, CO Online Status: Offline Posts: 355 |
Posted: 26 Sep 2018 at 11:54am |
|
|
marwayne
Senior Member Joined: 25 Oct 2011 Location: Edmonton AB Can Online Status: Offline Posts: 1002 |
Posted: 26 Sep 2018 at 12:15pm |
If you want something done right, do it yourself.
2011 RP172, 2016 Tundra 5.7 Litre, Ltd. |
|
StephenH
podders Helping podders - pHp Joined: 29 Nov 2015 Location: Wake Forest, NC Online Status: Offline Posts: 6326 |
Posted: 26 Sep 2018 at 1:53pm |
You must have some very soft water up where you live. Mine don't last that long.
|
|
StephenH
Happy is the man that findeth wisdom,... ouR escaPOD mods Former RPod 179 Current Cherokee Grey Wolf 24 JS |
|
TheBum
Senior Member Joined: 26 Feb 2016 Location: Texas Online Status: Offline Posts: 1407 |
Posted: 26 Sep 2018 at 2:10pm |
We got a little over two years out of our first one, but that's with only taking the Pod out a few times a year. I finally had to replace it before a rally this past weekend.
I don't clean off the anode rod when checking it because I want to keep as much of the sacrificial magnesium on it as possible. |
|
Alan
2022 R-Pod 196 "RaptoRPod" 2022 Ram 1500 Lone Star 4x4 Three cats |
|
TheBum
Senior Member Joined: 26 Feb 2016 Location: Texas Online Status: Offline Posts: 1407 |
Posted: 26 Sep 2018 at 2:19pm |
Has anybody bought aftermarket anode rods? Did you have any problems with them?
|
|
Alan
2022 R-Pod 196 "RaptoRPod" 2022 Ram 1500 Lone Star 4x4 Three cats |
|
marwayne
Senior Member Joined: 25 Oct 2011 Location: Edmonton AB Can Online Status: Offline Posts: 1002 |
Posted: 26 Sep 2018 at 3:29pm |
I don't travel with water, and empty all water before we head home
|
|
If you want something done right, do it yourself.
2011 RP172, 2016 Tundra 5.7 Litre, Ltd. |
|
Ben Herman
Senior Member Joined: 26 Apr 2018 Location: Gr Junction, CO Online Status: Offline Posts: 355 |
Posted: 26 Sep 2018 at 3:45pm |
Should be fine, its a generic item. I've even gotten them at local hardware stores.
|
|
Post Reply | Page <123> |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |