![]() |
Spider crack |
Post Reply ![]() |
Page 12> |
Author | |
Mom Dunn ![]() Newbie ![]() ![]() Joined: 29 Jul 2020 Location: Lexington,KY Online Status: Offline Posts: 15 |
![]() ![]() ![]() ![]() Posted: 02 Jun 2022 at 4:29pm |
I have a spider crack probably from a rock underneath the front window. What is the best way to deal with this? I can’t figure out how to upload a picture of it. Thanks in advance 😉.
|
|
![]() |
|
jato ![]() Senior Member ![]() ![]() Joined: 23 Feb 2012 Location: Kewadin, MI Online Status: Offline Posts: 3229 |
![]() ![]() ![]() ![]() |
Is it still under warranty? If not there is a product sold at auto parts stores that will stop the crack in its tracks if you get to it before it gets large.
|
|
God's pod
'11 model 177 '17 Ford F-150 4WD 3.5 Ecoboost Jim and Diane by beautiful Torch Lake "...and you will know the Truth and the Truth will set you free." |
|
![]() |
|
Mom Dunn ![]() Newbie ![]() ![]() Joined: 29 Jul 2020 Location: Lexington,KY Online Status: Offline Posts: 15 |
![]() ![]() ![]() ![]() |
It’s not under warranty, we bought in July2020. But thanks for the tip. Will go check the auto store.
|
|
![]() |
|
StephenH ![]() podders Helping podders - pHp ![]() ![]() Joined: 29 Nov 2015 Location: Wake Forest, NC Online Status: Offline Posts: 6297 |
![]() ![]() ![]() ![]() |
To clarify, this is in the gel coat below the window, correct?
|
|
StephenH
Happy is the man that findeth wisdom,... ouR escaPOD mods Former RPod 179 Current Cherokee Grey Wolf 24 JS |
|
![]() |
|
Mom Dunn ![]() Newbie ![]() ![]() Joined: 29 Jul 2020 Location: Lexington,KY Online Status: Offline Posts: 15 |
![]() ![]() ![]() ![]() |
![]() |
|
![]() |
|
StephenH ![]() podders Helping podders - pHp ![]() ![]() Joined: 29 Nov 2015 Location: Wake Forest, NC Online Status: Offline Posts: 6297 |
![]() ![]() ![]() ![]() |
You will need the advice of someone who has worked with fiberglass repairs to fill, sand, and re-paint with gel-coat. Then there is sanding and buffing to get it to blend in.
|
|
StephenH
Happy is the man that findeth wisdom,... ouR escaPOD mods Former RPod 179 Current Cherokee Grey Wolf 24 JS |
|
![]() |
|
Mom Dunn ![]() Newbie ![]() ![]() Joined: 29 Jul 2020 Location: Lexington,KY Online Status: Offline Posts: 15 |
![]() ![]() ![]() ![]() |
Like a boat place? We have lots of those here.
|
|
![]() |
|
StephenH ![]() podders Helping podders - pHp ![]() ![]() Joined: 29 Nov 2015 Location: Wake Forest, NC Online Status: Offline Posts: 6297 |
![]() ![]() ![]() ![]() |
That would likely be one of the best places.
|
|
StephenH
Happy is the man that findeth wisdom,... ouR escaPOD mods Former RPod 179 Current Cherokee Grey Wolf 24 JS |
|
![]() |
|
pedwards2932 ![]() Senior Member ![]() Joined: 21 Sep 2020 Online Status: Offline Posts: 333 |
![]() ![]() ![]() ![]() |
If Forrest River carries the gel coat that matches that would help. You have to grind the cracks out then fill with gel coat. It is difficult to spray gel coat because it is very thick. You also have to add a wax to the mix for it to dry. Gel coat is designed to be sprayed into a mold then the fiberglass is sprayed over top so the gel dries in an air free environment. A boat shop could do the repair but again it would help if you got matching gel coat for it.
|
|
![]() |
|
StephenH ![]() podders Helping podders - pHp ![]() ![]() Joined: 29 Nov 2015 Location: Wake Forest, NC Online Status: Offline Posts: 6297 |
![]() ![]() ![]() ![]() |
Correction: A catalyst is mixed with the gel coat. For that, a coating is sprayed over the top of the repair to seal it. Later, the coating is removed and the gel coat is sanded to make it level, then buffed until it matches the existing finish. I used to work for Uniflite (now defunct) that built cabin cruisers. That is how the flaws in the gel coat finish were repaired.
|
|
StephenH
Happy is the man that findeth wisdom,... ouR escaPOD mods Former RPod 179 Current Cherokee Grey Wolf 24 JS |
|
![]() |
Post Reply ![]() |
Page 12> |
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |