I leave my dinette table down and use this as my lounge, so I expected that at some point the screws would pull out from the rail that supports the table. It finally did this past month. Yes, they really should have provided more support as that table itself isn't light. Anyway, I took slightly longer screws and screwed about four more screws into each wood support rail. I used gray shutter anchor screws from Lowes. They seemed to have more raise on their screw than what Forest River put in there. I have also had occasion where a very small amount of water came out of the sewer outlet when I removed the cap. I agree that it is most likely due to all the sloshing and shaking from the long road trip. I also had a significant amount of saw dust and a few screws on the floor under the dinette table seats. I just figured that somebody forgot to clean up their construction mess and cleaned it up myself. It's all cool... I love my Pod anyway.