Cabinets |
Post Reply | Page 123> |
Author | |
marwayne
Senior Member Joined: 25 Oct 2011 Location: Edmonton AB Can Online Status: Offline Posts: 1002 |
Topic: Cabinets Posted: 15 Apr 2014 at 11:14pm |
If you want more cabinet space, here is how I built our corner cabinets. Pics are worth 1000 words.
|
|
If you want something done right, do it yourself.
2011 RP172, 2016 Tundra 5.7 Litre, Ltd. |
|
techntrek
Admin Group - pHp Joined: 29 Jul 2009 Location: MD Online Status: Offline Posts: 9062 |
Posted: 16 Apr 2014 at 8:26am |
Just a cabinet? That's all you did this time?
I'm kidding! Looks good, as always. I like how you created the support on the ceiling with multiple pieces to conform to the curve. Not sure I would support the floor from below with a few screws. With the dynamic loading going down the road and a full cabinet I'd put supports in from below, even though they would be visible. Maybe if you screwed & glued on all edges that is ok.
|
|
Doug ~ '10 171 (2009-2015) ~ 2008 Salem ~ Pod instruction manual
|
|
kymooses
Senior Member Joined: 01 Aug 2010 Location: Louisville, Ky Online Status: Offline Posts: 1807 |
Posted: 16 Apr 2014 at 9:33am |
|
|
marwayne
Senior Member Joined: 25 Oct 2011 Location: Edmonton AB Can Online Status: Offline Posts: 1002 |
Posted: 16 Apr 2014 at 10:55am |
Tech, the supports you are talking about are there, they are inside the cabinet. The strip on the ceiling is in two pieces with a cut almost through every 3 to 4", it is easier to keep it in line.
Just because you can't see them dos not mean there not there. |
|
If you want something done right, do it yourself.
2011 RP172, 2016 Tundra 5.7 Litre, Ltd. |
|
Goose
Senior Member Joined: 24 Sep 2010 Location: Arizona Online Status: Offline Posts: 672 |
Posted: 16 Apr 2014 at 10:57am |
Great job as always!!!! Goose
|
|
Mother Goose's Caboose..2011 RP171..07 Grand Cherokee
|
|
marwayne
Senior Member Joined: 25 Oct 2011 Location: Edmonton AB Can Online Status: Offline Posts: 1002 |
Posted: 16 Apr 2014 at 11:50am |
There is that misconception that a shelf support has to be under the shelf, not so. You can make it invisible by putting it inside the cabinet.
The supports don't have to be 2 or 3" wide, for these small cabinets 3/4" to 1" is quite sufficient. |
|
If you want something done right, do it yourself.
2011 RP172, 2016 Tundra 5.7 Litre, Ltd. |
|
bmkparshall
Newbie Joined: 27 Sep 2013 Location: Bear Creek PA Online Status: Offline Posts: 10 |
Posted: 16 Apr 2014 at 12:17pm |
Looks really nice!
I'm considering a few mods, but not sure about the attachment to the wall. With wood wall supports would I need to pre-drill thru the support and wall surface and then using the pre-drilled hole in the wall surface as a guide, make the hole larger to insert a plastic wall anchor? Any help is greatly appreciated! |
|
B MK Parshall
2016 Silverado 5.3 V8 and R-178 Poddler |
|
hogone
Senior Member Joined: 09 Apr 2013 Location: St. Louis Online Status: Offline Posts: 1049 |
Posted: 16 Apr 2014 at 12:33pm |
marwayne: you do some really nice work. hogone
|
|
Jon & Pam
2013 RP177 2010 F150 2017 HD Streetglide 2009 HD Lowrider CHEESEHEAD |
|
marwayne
Senior Member Joined: 25 Oct 2011 Location: Edmonton AB Can Online Status: Offline Posts: 1002 |
Posted: 16 Apr 2014 at 12:46pm |
This is the second cabinet in that location, I made the first one 10" deep so I wouldn't bump my head on it, as it turned out there was a lot of room left so I made the second one 14" deep and still have room to spare.
I don't use any anchors, predrill the holes in the supports so the screws go through freely and than fasten it to the wall. I use coarse thread dry wall screws (grabbers) but be careful you don't overturn them. You be surprised how well it holds. |
|
If you want something done right, do it yourself.
2011 RP172, 2016 Tundra 5.7 Litre, Ltd. |
|
fwunder
Senior Member Joined: 04 Oct 2013 Location: New Jersey Online Status: Offline Posts: 1676 |
Posted: 16 Apr 2014 at 2:16pm |
Beautiful work, as always.
What is your stain mix? fred
|
|
2014 RPod 178 => MyMods and Buying Habits
2008 4Runner Limited 4.0-liter V6 Yes, those are wild ponies dining on grass while dumping tanks! |
|
Post Reply | Page 123> |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |