Slide out cover |
Post Reply | Page <12 |
Author | |
JHoffman
Groupie Joined: 06 Mar 2016 Location: Westfield, MA Online Status: Offline Posts: 82 |
Topic: Slide out cover Posted: 11 Apr 2016 at 10:04pm |
We have the 176T, I'm also thinking about adding more snaps to the bottom of the tent to snap it to the bottom side of the bed. There are only two on it now, one at both inside corners. Our old pop up camper was fastened at several places all the way around the pirimiter.
|
|
2016 176t Rpod the "Hoffpod"
2010 Toyota Tundra 5.7L |
|
StephenH
podders Helping podders - pHp Joined: 29 Nov 2015 Location: Wake Forest, NC Online Status: Offline Posts: 6327 |
Posted: 11 Apr 2016 at 11:33pm |
The bungees were stopgap on the one I made. Currently, I am using parachute cord on the three middle ones that extend most of the way down and then short bungee cords for the rest. I did not have a chance to take pictures because I was getting ready to leave on a trip. I also thought of using snaps. The problem was that I could not locate any suitable snaps before I had to leave, so I chose the best available option. As for leaving it on or removing it, for now, I am removing it for travel. Ultimately, I want to figure out a way to roll and stow it in place. I just did not have time to do so. As soon as I can, I'll post a couple of updated pictures. |
|
StephenH
Happy is the man that findeth wisdom,... ouR escaPOD mods Former RPod 179 Current Cherokee Grey Wolf 24 JS |
|
GLBCamper
Senior Member Joined: 30 Jun 2015 Location: Oregon Online Status: Offline Posts: 274 |
Posted: 12 Apr 2016 at 5:48pm |
I like that idea, but how would you attach snaps to the pod? I would hate to use screw snaps and I doubt "peel and stick" would last long.
|
|
Old: 2014 177 HRE
2015 Tacoma V6 4x4 Double Cab New: 2016 EVO ATS 200rd 2016 F150 4x4 Sport |
|
JHoffman
Groupie Joined: 06 Mar 2016 Location: Westfield, MA Online Status: Offline Posts: 82 |
Posted: 12 Apr 2016 at 7:36pm |
I was thinking that stainless steel marine snaps with a dab of sealant under the snap would be ok. If it works on boats it should work on a camper. The screw will mostly seal itself and the dab of sealant will take care of the rest. Figured it wouldn't be any different then screwing a light fixture or outdoor speaker to the side.
|
|
2016 176t Rpod the "Hoffpod"
2010 Toyota Tundra 5.7L |
|
SandD
Newbie Joined: 09 Sep 2014 Location: nc Online Status: Offline Posts: 35 |
Posted: 12 Apr 2016 at 8:40pm |
These would work better than snaps for holding power.
http://www.sailrite.com/Common-Sense-Fastener-Cloth-to-Surface-Complete-5-8-Screw |
|
There are two types of people in the world. Those who like RPODs and those who are wrong.
Rpodder 2014 RPOD 178 06 Tacoma Prerunner TRD |
|
JHoffman
Groupie Joined: 06 Mar 2016 Location: Westfield, MA Online Status: Offline Posts: 82 |
Posted: 12 Apr 2016 at 9:42pm |
I like that idea. I've seen those before but forgot about them.
|
|
2016 176t Rpod the "Hoffpod"
2010 Toyota Tundra 5.7L |
|
StephenH
podders Helping podders - pHp Joined: 29 Nov 2015 Location: Wake Forest, NC Online Status: Offline Posts: 6327 |
Posted: 13 Apr 2016 at 4:22pm |
SandD, Those have the same issue as snaps in that it will require drilling holes in the metal or the fiberglass. I would not mind if it were just long enough to go through and be backed up by a locknut or lockwasher and nut, but the screws are much too long. Cutting them off after installing would really be a pain. There would also be the risk of damaging it while doing so.
The cords and short bungees seem to be the better solution for now. I am still looking for a viable alternative. Edit: I just posted a new picture in my mods which shows the improved attachment method I am using. |
|
StephenH
Happy is the man that findeth wisdom,... ouR escaPOD mods Former RPod 179 Current Cherokee Grey Wolf 24 JS |
|
GLBCamper
Senior Member Joined: 30 Jun 2015 Location: Oregon Online Status: Offline Posts: 274 |
Posted: 20 Apr 2016 at 5:45pm |
Just an update. It was just 10 days from order placed to delivered for my PaHaQue slide cover! Can't wait to try it out!
|
|
Old: 2014 177 HRE
2015 Tacoma V6 4x4 Double Cab New: 2016 EVO ATS 200rd 2016 F150 4x4 Sport |
|
Post Reply | Page <12 |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |