Window For 2026 R-pod 179?

Davemar,
I'll do a post on the process after I'm done My go to for this type of project is a 4" grinder,but jig saw or sawsall may come into play. Does your 180 have a fan in the bath? Or does anyone know if the 17.5 has one? I think the no fan, or venting in the bath (rainforest) thing is lame.
Rgds john

Originally posted by mcarter Voisj, Seeing as how you are not talking about the door, where many of us have put a window. I recommend you get a stud checker and make sure you are not cutting a support. I know mine does not have a frame persay, it has strategically placed supports that bolster the walls.

mcarter,
I'm way past that, the rear curved back of the pod has horizontal wood pieces centered at 9" I custom made the window at 8" tall by getting a 24" wide by 30" tall window and cutting down the frame to 24" wide by 8" tall and getting a new tempered smoked piece to fit the new window size. Got the window on eBay. The height is made so it will still work with the curve. When I pulled the interior wall skin loose there was no insulation in that Bay! But the one above and below it was insulated. The window will be 5' off the floor.
Rgds, john

GoGirlKY,

Check out Vintage Technologies on the Internet, they sell same window as Amazon, much cheaper. Good folks to deal with. That is where I got my door window.