Window For 2026 R-pod 179?

Ours is also a 2016 RP179. I installed a window. You can see it in my mods (link in signature). I ordered it on Amazon. You would need to check for current price. The hardest part about it is getting up the nerve to cut into your door. Make a template and cut tight to it. If the opening is a little small, enlarge it a little at a time. It is better to cut small and adjust than to cut too big.

GoGirlKY,

Check out Vintage Technologies on the Internet, they sell same window as Amazon, much cheaper. Good folks to deal with. That is where I got my door window.

Originally posted by mcarter Voisj, Seeing as how you are not talking about the door, where many of us have put a window. I recommend you get a stud checker and make sure you are not cutting a support. I know mine does not have a frame persay, it has strategically placed supports that bolster the walls.

mcarter,
I'm way past that, the rear curved back of the pod has horizontal wood pieces centered at 9" I custom made the window at 8" tall by getting a 24" wide by 30" tall window and cutting down the frame to 24" wide by 8" tall and getting a new tempered smoked piece to fit the new window size. Got the window on eBay. The height is made so it will still work with the curve. When I pulled the interior wall skin loose there was no insulation in that Bay! But the one above and below it was insulated. The window will be 5' off the floor.
Rgds, john