Wish List?

I would like the option to order without the front window. Given the problems I have read about here, I would just as soon do without that window and the additional potential for leaks and breaking.

I would love to see a 195/196 type layout with a Murphy bed that is fronted with a jackknife sofa and folds out to a full-size queen, as with the 192/193. While I know it would take some natural light away when the bed is folded up over the window, I'd be willing to trade that off for the additional seating and floor space. Of course, I could be an outlier on this idea. It also could be that layout limitations wouldn't allow such an option.

There is an RPod Wish List that owners contribute to on Amazon -

Originally posted by tjdmobile Our wish list is a combination of practical improvements, and gripes. 1.  Yes, please move the furnace.  I would rather have it under the kitchen cabinets on our 179 than where it is under the bed. 2.  Exhaust fan of ANY sort in the kitchen.  We were not excited on that first cold day to have to open the front door and pull air through the fan in the wet bath to keep from having to deal with Carbon Monoxide when using the range. 3.  Mounting points for "optional" cabinets.  They could sell us the optional cabinets over the bed / kitchen counters, and we would buy them. 4.  Deeper drawers.  Like others, I was handy and was able to build new boxes for the kitchen drawers which were deeper in both directions.  That could have been stock 5.  Here's my gripe:  Better workmanship / better dealer prep.  So many things didn't line up properly, close properly, etc.  Places not expected to be seen by the owner (such as behind the stereo) totally loaded with construction garbage.  In spite of all these things I still feel we made a solid buy. I used to think I wish we had chosen a model with a dry bath, but when we considered the lack of storage space, we made the right choice with the 179.

#1 I think it would fit quite nicely under the sink, even if we had to give up one or two of the drawers in order to do so. I would gladly take the furnace space as storage to replace the drawer(s). I don't think people would use the furnace going down the highway. The only downside would be the spare tire location would mean the hot exhaust would be hitting the tire so the mount for that would need to be changed/relocated. If the spare were underneath (using something like the BAL Hide-A-Spare), it would resolve that issue. Install a longer sewage hose 'bumper' carrier, and another issue would be solved--too short a carrier to hold a practical length of hose.
#2 I would like to see some sort of exhaust fan there as well. Unfortunately, the location of the stove on the angle makes that tricky. If the cabinet were "L" shaped so the stove could sit parallel to the wall, it would be easier to have a vent hood over the stove. The rectangular shape would be easier to use for storage as well.
#3 Interesting idea although over the kitchen is not something that could be viable because of the roof's curve. If the back were squared-off, then it would work since here would be the needed space. The front has the same issue. The shelf I installed works quite well with the bins I strap to it.
#4 I did the kitchen drawers first. I made them longer, but did not make them deeper. I should have. When I did the ones for the wardrobe, I made them both longer and deeper, taking advantage of the wasted space behind the original drawers.
#5 Yes, lots of trash in hidden places. When they are assembled, the workers don't clean as they go and then trash gets covered over. It would be nice if the dealer would vacuum that trash out as part of dealer prep, but it is "out of sight, out of mind."
Like you, the bigger kitchen was the deciding factor for us. We decided we could live with the wet bath. The None of the small trailers with the queen bed turned so it has access on both sides that I have seen have as nice a kitchen space and storage as the RP179. We will stick with it until we find something that has a layout that we can live with. In the meantime, I have made a number of modifications to ours (see link in signature) to make it even better and more suited to our use. Because it was economical, I can afford to do these modifications.

I agree with quality control issues.  I think the manufacturer expects the dealers to do the minor repairs before they sell them to the consumer, but that doesn't always happen.  Mine came with several issues that I was willing to resolve within one weekend, but it shouldn't be that way.