Potential converter problem |
Post Reply | Page <1 34567> |
Author | |
fwunder
Senior Member Joined: 04 Oct 2013 Location: New Jersey Online Status: Offline Posts: 1676 |
Topic: Potential converter problem Posted: 11 Aug 2018 at 7:00am |
Hi GlueGuy,
I measured the AC with my Kill-A-Watt. That's where the 1600+ came from. It wasn't happy. The 950 watts came from the Progressive Dynamics website => https://www.progressivedyn.com/rv/power-converters/inteli-power-4600-series/#specifications Perhaps I am reading it wrong? fred
|
|
2014 RPod 178 => MyMods and Buying Habits
2008 4Runner Limited 4.0-liter V6 Yes, those are wild ponies dining on grass while dumping tanks! |
|
GlueGuy
Senior Member Joined: 15 May 2017 Location: N. California Online Status: Offline Posts: 2630 |
Posted: 10 Aug 2018 at 10:33pm |
|
|
bp
2017 R-Pod 179 Hood River 2015 Ford F150 SuperCrew 4WD 3.5L Ecoboost |
|
fwunder
Senior Member Joined: 04 Oct 2013 Location: New Jersey Online Status: Offline Posts: 1676 |
Posted: 10 Aug 2018 at 8:13pm |
Just wanted to add...
I carry a Yamaha 2400 genny. During a ridiculously hot and skeetery night night on Prince Edward Island boon docking, I found my AC would not kick on with generator. Surprised me. Turns out the PD4655V draws about 950 watts @ full load and AC (measured) is 1600+ watts. A bit too much for Yammy. Turning off converter for AC works fine. fred
|
|
2014 RPod 178 => MyMods and Buying Habits
2008 4Runner Limited 4.0-liter V6 Yes, those are wild ponies dining on grass while dumping tanks! |
|
fwunder
Senior Member Joined: 04 Oct 2013 Location: New Jersey Online Status: Offline Posts: 1676 |
Posted: 10 Aug 2018 at 7:46pm |
My WFCO fan starting making more noise than my CPAP machine. Just figured that was not a good omen. After a bunch of reading, decided a prophylactic change would be a good idea. I have dual 6v Duracells.
Went with the Progressive Dynamics PD4655V. Amazon => https://www.amazon.com/gp/product/B002OR4242/ The unit itself is a direct replacement and pretty straight forward. The distribution board, however, does not fit (my) WFCO 8955. Also, the board that came with it is a 80 amp board with a max fused position of 20 amp vs. the existing 150 amp board with max fused position of 30 amp for slideout. I decided to use the existing WFCO 8955 distribution board and confirmed with Progressive Dynamics. They did, in fact, send me a "charge wizard" dongle if I wished to use the manual 14.2 v. boost mode override. The override might be useful for pumping a bunch of amps into batteries in a short amount of time while on generator. My experience so far has been that the dongle seems unnecessary. I have a panel mounted voltmeter and the converter seems to be intelligently and quietly charging @ 14.2, 13.6 and 13.2 volts as needed. I am glad I made the swap and sleep better. fred
|
|
2014 RPod 178 => MyMods and Buying Habits
2008 4Runner Limited 4.0-liter V6 Yes, those are wild ponies dining on grass while dumping tanks! |
|
DavMar
Senior Member Joined: 04 Aug 2017 Location: Lexington, NC Online Status: Offline Posts: 592 |
Posted: 10 Aug 2018 at 6:26pm |
It maybe simply that WFCO now has a new manufacture assembling their boards. The circuit board maybe a thinner, smaller circuit board traces and lands, or they went with a cheaper power resistors with smaller leads. I can't say what exactly is their problem but a problem they do now have. They also need to upgrade what they use to "cement" components such as these large power resistors to the circuit board. When I pulled the circuit board out it was so obvious that these resistors had broken leads due to vibration. As I said one of the best backups you can have for your camper and tow vehicle too is a cheap battery charger.
|
|
Dave & Marlene J with Zoey the
wonder dog. 2017 Rpod 180 2016 Toyota Tacoma SR5 4x4 Lexington, NC |
|
mcarter
podders Helping podders - pHp Joined: 07 Apr 2016 Location: Greenbrier, TN Online Status: Offline Posts: 3419 |
Posted: 10 Aug 2018 at 5:51pm |
There's another post on here with same failure. They may weigh in. Resistors fell off board. Interesting, many of us have WFCO convertors that have lasted years. Some issues reported earlier. Like the idea of PD replacement and keeping WFCO as backup.
|
|
Mike Carter
2015 178 " I had the right to remain silent, I just didn't have the ability." |
|
DavMar
Senior Member Joined: 04 Aug 2017 Location: Lexington, NC Online Status: Offline Posts: 592 |
Posted: 10 Aug 2018 at 5:43pm |
Thought this would be a good thread to tag onto. I've learned a couple things about converters since mine died on our recent road trip. First is to carry a car battery charger with you. Once I figured out my converter died I was able to keep on rolling by just switching off the AC power to converter breaker and hooking up the charger to the battery. Second after removing the dead WFCO converter and examining it my conclusion is its JUNK! I found a number of the large ceramic power resistors had broken loose from the circuit board. I've sent that back to WFCO for warranty repair, for a spare back up, but have now installed a Progressive Dynamics PD4655 converter. It's pricey but I shouldn't have to worry about resistors falling off the circuit board and the converter failing.
|
|
Dave & Marlene J with Zoey the
wonder dog. 2017 Rpod 180 2016 Toyota Tacoma SR5 4x4 Lexington, NC |
|
lgblau
Senior Member Joined: 09 Feb 2018 Location: Arizona Online Status: Offline Posts: 140 |
Posted: 19 Jun 2018 at 9:01am |
I like that setup. Can’t imagine not having the lighter style 12 volt not factory installed. I will try, following your instructions. Thanks, and have a great day.
|
|
Leonard🌵
2017/179 2017 Ram 1500 |
|
Davidb
Newbie Joined: 07 Jun 2017 Location: Louisiana Online Status: Offline Posts: 15 |
Posted: 19 Jun 2018 at 6:06am |
Update:
My replacement WFCO arrived a few days ago, will carry it as a spare.
|
|
David
|
|
mcarter
podders Helping podders - pHp Joined: 07 Apr 2016 Location: Greenbrier, TN Online Status: Offline Posts: 3419 |
Posted: 19 Jun 2018 at 1:54am |
BTW - I bought a combination gauge, that has LED voltmeter, 2 USB ports and a lighter style plug.
|
|
Mike Carter
2015 178 " I had the right to remain silent, I just didn't have the ability." |
|
Post Reply | Page <1 34567> |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |