182g storage Cover

Hi everyone! Does anyone have any ideas on where I can find a storage cover for my 2011 182G?

I read on this forum that the cover sold by Northern Tools for $149. works but I looked at the dimensions and it says the length of the cover is 13 feet.  I didn't think R=Pods came in a 13 foot model.  The dealer wants over $600 bucks?  So I'm trying to confirm if the National Tool Cver will fit an 182G.

I'll have to measure the body only then.  When we crossed Lake Michigan on "The Badger" it measured 20 feet from hitch to back end.  Had problems with it though: air conditioner wiring was bad a caused problems with cooling the thing.  Had to take thermostat off the wall and move the hard wire around to get it going.  Initially I thought te thermostat was bad, replaced that but same problem.  Bent axle blew out the driver side wheel bearings in the Payette Mountains in Idaho, almost set the thing on fire, running lights on the fender of the same tire where blowing out from Idaho East.

  If you are ok with cammo, they have one listed on that same page for $300.  But I would buy a generic cover for much less. 

The large one from Northern Tool apparently fits other models of Rpod snuggly and well from what I've read elsewhere.  Considering that I would not think the larger Northern Tool one would be able to fit the 18xx models.