Rear Marker Lights |
Post Reply | Page 12> |
Author | |
P&M
Senior Member Joined: 13 Aug 2012 Location: Spokane, WA Online Status: Offline Posts: 454 |
Topic: Rear Marker Lights Posted: 06 Nov 2013 at 9:02am |
Nice work to both of you on the self-creations and installs!
|
|
P & M ... and Comet too!
2012 171 -- The Monkey Pod 2018 Ram 2500 |
|
Goose
Senior Member Joined: 24 Sep 2010 Location: Arizona Online Status: Offline Posts: 672 |
Posted: 05 Nov 2013 at 9:53pm |
Like Marwayn I made our own light bar using vinyl window sill material. I secured it to the roof with a two part marine epoxy. After two years of 100+ temps in AZ. and days at 0 degrees here in MO., no signs of shrink or contraction cracks. I check it from time to time to see if I chose the right materials, so far so good. Goose
|
|
Mother Goose's Caboose..2011 RP171..07 Grand Cherokee
|
|
furpod
Moderator Group - pHp Joined: 25 Jul 2011 Location: Central KY Online Status: Offline Posts: 6128 |
Posted: 05 Nov 2013 at 1:45pm |
Yours will have a completely different light bar, it will be glued and screwed and caulked. It will not run side to side like the retrofit bars do. So far my reto bar has held up fine and stayed in place, except a little gappage at the top that FR took care of at Goshen. If it comes up again, I will redo it myself with better double sided tape. From what I have seen, it seems that several maybe weren't properly cleaned before the adhesive was activated. And I know at least one that the dealership didn't know how to use the activator.. |
|
CharlieM
Senior Member Joined: 23 Nov 2012 Location: N. Colorado Online Status: Offline Posts: 1797 |
Posted: 05 Nov 2013 at 12:19pm |
"This is the reason I made my and installed my own light bar."
And your signature quote gets proven right....over and over again. Charlie |
|
Charlie
Northern Colorado OLD: 2013 RP-172, 2010 Honda Pilot 3.5L 4WD PRESENT: 2014 Camplite 21RBS, 2013 Supercharged Tacoma 4L V6 4WD |
|
marwayne
Senior Member Joined: 25 Oct 2011 Location: Edmonton AB Can Online Status: Offline Posts: 1002 |
Posted: 05 Nov 2013 at 11:30am |
This is the reason I made and installed my own light bar.
|
|
If you want something done right, do it yourself.
2011 RP172, 2016 Tundra 5.7 Litre, Ltd. |
|
TerryM
Admin Group - pHp Joined: 16 Nov 2009 Location: Saint Augustine Online Status: Offline Posts: 1950 |
Posted: 05 Nov 2013 at 11:22am |
I don't have the paper work that came with it so I wouldn't know. Could be though.
Terry |
|
RP-175 W/Lift Kit 2011 Ford F-150 4X4
Saint Augustine, FL: The first permanent European settlement in the USA: 1565 |
|
Sleepless
Senior Member Joined: 07 Jun 2013 Location: Titusville, FL Online Status: Offline Posts: 556 |
Posted: 05 Nov 2013 at 10:31am |
Terry, that is a good point about the curvature of the light bar. Susan (actually Lindsay) sent a light mod kit to my dealer for my 2010 173. In a later conversation with Susan she told me that they had sent the wrong kit for my particular model. After waiting about 2 months for the right kit, I traded my pod in on a new 178.
So, apparently FR has more than one model light bar for the pods. I wonder if they sent you the correct model. Bob |
|
2014 R-Pod 178 (OUR POD)
2009 Chevrolet Avalanche |
|
TerryM
Admin Group - pHp Joined: 16 Nov 2009 Location: Saint Augustine Online Status: Offline Posts: 1950 |
Posted: 05 Nov 2013 at 10:23am |
Hard to say what caused it. It was parked in the sun with a cover on it. I got my Pod in Ohio but it was a locale RV dealer that put it on. I think maybe the reason it came loose is the light bar was probably made without a curvature to it to match the Pod roof.
Terry |
|
RP-175 W/Lift Kit 2011 Ford F-150 4X4
Saint Augustine, FL: The first permanent European settlement in the USA: 1565 |
|
David and Danette
podders Helping podders - pHp Joined: 24 Nov 2009 Online Status: Offline Posts: 1214 |
Posted: 05 Nov 2013 at 10:10am |
Sorry about that Terry do you think it was the sun or temperature change that caused it to bow and come loose. David
|
|
2018 Vista Cruiser 19BFD (2018-
2012 Vibe 6503 (2014-2019) 2009 r-pod 171 (2009-2014) Middle Tn 2014 Ram 1500 Quad cab |
|
techntrek
Admin Group - pHp Joined: 29 Jul 2009 Location: MD Online Status: Offline Posts: 9059 |
Posted: 05 Nov 2013 at 9:30am |
Yowza, I agree that needs to go back pronto. However, I would make sure they DON'T put any sealant on the bottom edge after it is re-mounted, to allow for drainage.
|
|
Doug ~ '10 171 (2009-2015) ~ 2008 Salem ~ Pod instruction manual
|
|
Post Reply | Page 12> |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |