Originally posted by Unclewillis
I keep meaning to post this and keep forgetting.
I recently drained the fresh water tank for the 1st time since new. Alot of plastic shavings came out of the drain, which leads me to assume there might be more that did not fit through the drain.
You may want to do this on a new model. having that debris in the pump would not be good |
There is a strainer/filter device before the pump, little round thing with a twist off cap that you can clean out.
These manufacturing shavings will end up at the end of your lines at the faucets sometimes preventing waterflow, you can pop off the little screens then and flush them out all the way.