Do I want front stabilizers? |
Post Reply | Page 12> |
Author | |
Guests
Guest Group |
Topic: Do I want front stabilizers? Posted: 01 Nov 2009 at 3:50pm |
Definitely. With just the jack in the front and the two rear stabilizers you will get a good deal of rocking. Right now I use these http://www.campingworld.com/shopping/product/aluminum-stack-jacks/1714, but will be installing this soon http://www.campingworld.com/shopping/product/bal-telescopic-stabilizing-jacks/1822. As for leveling these work great www.campingworld.com/shopping/item/rv-leveling-blocks-8-pack/43849
|
|
Guests
Guest Group |
Posted: 01 Nov 2009 at 10:37am |
Gee, thanks But, I did manage to frighten a few ghouls and goblins (and one Harry Potter) last night |
|
techntrek
Admin Group - pHp Joined: 29 Jul 2009 Location: MD Online Status: Offline Posts: 9059 |
Posted: 31 Oct 2009 at 4:21pm |
Our first trip started 10 minutes after we picked up the 'pod, so no stabs that weekend. Felt like I was on a boat. Every trip since then I've used jack stands up front and now its rock solid. And yes, use something under the wheels to level, and only turn the stabs one turn after they make contact with the ground.
|
|
Doug ~ '10 171 (2009-2015) ~ 2008 Salem ~ Pod instruction manual
|
|
Guests
Guest Group |
Posted: 31 Oct 2009 at 9:25am |
I level the trailer using a BAL leveler (left / right) and the tongue jack. Then I deploy the stabilizers (the two provided plus two scissors-style stabilizers permanently mounted to the front, which I got from Harbor Freight). Works great!
To answer the OP, yes they are very much worth it. Once you have them, you'll wonder why you didn't do it sooner.
|
|
Guests
Guest Group |
Posted: 31 Oct 2009 at 12:29am |
I kind of doubt that the frame would be damaged, after all it is heavy enough to support the camper and used to jack it up. The stabilizers on the other hand would and have been damaged doing that.
Terry |
|
yizit
podders Helping podders - pHp Joined: 25 Feb 2009 Location: Wis. Dells, WI Online Status: Offline Posts: 663 |
Posted: 30 Oct 2009 at 11:45pm |
Yes get the stabilizers! You will be glad you did. FYI the stabilizers are just that...stabilizers. They are not meant to raise the trailer. You can cause damage to your frame and the jacks.
|
|
Former owner of 2009 172 Darlene & Jim, Ewok our Lhasa Roada our 2004 Roadtrek C190Popular |
|
Guests
Guest Group |
Posted: 30 Oct 2009 at 5:27pm |
Ive read many a post about this issue.
For what its worth:
It "is" true that you shouldnt use stabilizers for "leveling".
That isnt what they are for.
I use a Bal Light Trailer Single Axle "leveler" under the "low-side" tire for "side to side" leveling.
I currently use the "stock" front tongue lift for "front to back" leveling.
(I may go with retractable tongue lift cause the current one hits my driveway when backing it in)
Then after "Level" is accomplished I retract the "stabilizers" to enforce the "Level". Possibly one turn after I feel any resistance from it reaching the ground. Then I check the "level" again.
Since arriving back home Ive incorporated small pieces of treated 4x4's under the tongue lift and all stabilizers.
Before I attempt to "Level" the Pod, I position it to the place where it will sit. I then determine which side is low. I chock the "low" tire with my Bal Leveler, and the "high" tire with both of those plastic yellow chocks that was included in the Couch's RV starter kit.
I then disconnect the Pod placing a piece of 4x4 under the tongue lift.
I place my level in the middle of the Pod floor (side to side) and get my 1st mate (Cindy) to eye it for
me as I adjust the Pod via the Bal-Leveler for "side-to-side" leveling.
Then we move the level to point "front to back" and use the tongue lift for "front to back" leveling.
Once that is attained, we check both levels again, then I incorporate the "stabilizers", lowering each one on another 4x4 until I get resistance. I usually go a turn or two (at the most) after that. If any "play" is noticable, then re-check the level and re-check the stabilizers.
This was the procedure (minus the 4x4s) we came up with on our very first night camping at Huestons after pick-up of the Pod. (of course reading many articles and posts helped us to no end)
Its not rocket-science, but it really worked well for us. Im not sure about the retractable tongue lift that have a "wheel" on it. If the wheel is removable then Id be ok with that. Its just that Im not real comfortable knowing it could/might have a tendency to move. Id rather remove the wheel, and let the shaft rest on a 4x4. That I could live with.
HAPPY PODing !!!
|
|
Guests
Guest Group |
Posted: 30 Oct 2009 at 3:26pm |
|
|
Guests
Guest Group |
Posted: 30 Oct 2009 at 1:33pm |
Craig - get the stabilizers - you'll be glad you did.
The ones that come on the trailer are a rather cheap chinese made stabilizer. Not certain but I think the Bal stabilizers may be a bit more heavy duty. For that reason you may want to put your existing ones on the front and the Bal stabilizers in the rear. I had also contemplated moving the rear stabilizers forward a bit (perhaps 6") as they seem to be the first thing to drag when going in and out of our driveway. Unfortunately there is no crossmember at this point so I'd have to weld something in. Ideally, I'd like to put in some sort of skid plate or caster on the rear as some motorhomes have so that the skid plate or caster is the thing that touches the ground not the paintwork on the frame or heaven forbid the rear bodywork of the R-pod.
Btw, I noticed the new photo (your mug) - is it just a coincidence that its Hallowe'en tomorrow? mwhahaha
just kidding
|
|
Guests
Guest Group |
Posted: 30 Oct 2009 at 1:22pm |
We put them on ours and they made a noticeable difference in stability.
We don't have risers and so far have been fine.
|
|
Post Reply | Page 12> |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |