Author |
Share Topic Topic Search Topic Options
|
mountainman
Newbie
Joined: 24 Apr 2016
Online Status: Offline
Posts: 24
|
Calendar Event: Installing new windows Posted: 10 Jan 2017 at 12:12pm |
My Pod is the #172 with large bunks in the front and dinette in the back. There are no windows at the bunk end of the pod. I want to install opening windows there (on the sides only not on the front body curve) for light and ventilation. However I'm reluctant to do it myself. If they leaked I'd have no one to complain to.
I was at my local Camping World facility yesterday and they said they "probably" could do it. Has anybody had them do body repairs/new work such as this and if so was it done to your satisfaction? One of the body shop men lives near me and was kind enough to offer to look at the trailer at my home so I didnt have to take it to them for inspection which I felt was pretty nice.
There are other RV shops in my area that could do it also so I do have other options.
mountainman
|
|
voisj
Senior Member
Joined: 19 Jul 2016
Location: San Luis Obispo
Online Status: Offline
Posts: 471
|
Posted: 10 Jan 2017 at 1:12pm |
M-Man, In my opinion, anything is possible, But some things just don't make sense. I Think for me it comes down to, do i have to cut an aluminium framing stud? I wouldn't Some others would.
Go get a REAL GOOD stud finder, Mine sees all studs, metal or wood and electrical wires, and see where the aluminium studs are. If there is no stud where you want a window, this is a relitivly simple project. Pretty much just cut the hole and put in a window. Here's to hoping! John
|
SLOPODMODS
John&Sue,SLO,CA
2016 180 HRE, 2013 F150 Eco Boost
|
|
furpod
Moderator Group - pHp
Joined: 25 Jul 2011
Location: Central KY
Online Status: Offline
Posts: 6128
|
Posted: 10 Jan 2017 at 6:15pm |
We have a couple owners who have done small portholes that open, It's not a big deal.. but it is cutting some holes in your pod..
|
|
mcarter
podders Helping podders - pHp
Joined: 07 Apr 2016
Location: Greenbrier, TN
Online Status: Offline
Posts: 3419
|
Posted: 10 Jan 2017 at 6:36pm |
I put a window in my door. Not impossible, just need basic skills and be patient. In old days I used to put windows in vans and sunroofs in cars. Make a pattern, measure multiple times.
|
Mike Carter
2015 178
" I had the right to remain silent, I just didn't have the ability."
|
|
marwayne
Senior Member
Joined: 25 Oct 2011
Location: Edmonton AB Can
Online Status: Offline
Posts: 1002
|
Posted: 10 Jan 2017 at 7:37pm |
|
If you want something done right, do it yourself.
2011 RP172, 2016 Tundra 5.7 Litre, Ltd.
|
|
mountainman
Newbie
Joined: 24 Apr 2016
Online Status: Offline
Posts: 24
|
Posted: 11 Jan 2017 at 11:14am |
Thanks to all who have replied. I agree, if there are no studs or wires in the way, it's just a matter of cutting the holes, adding blocking, and sealing them good. I live in the northern Puget Sound area of Wash. St. so the pod will get rained on a lot! The stud finder I have won't locate metal studs; if not too expensive I may get one if I wind up doing this myself. Last winter I took some pictures of the pod when it was below freezing. The metal framing shows up quite well in them to get at least an approximate idea where they are.
Marwayne, can tell me where you got the portholes? Do they open? I've found 14" x 16" and 21" x 14" that should fit but I'd like to see what other sizes are available.
mountainman
|
|
marwayne
Senior Member
Joined: 25 Oct 2011
Location: Edmonton AB Can
Online Status: Offline
Posts: 1002
|
Posted: 11 Jan 2017 at 12:27pm |
No they do not open, my DW does not like a draft over her head while sleeping. I made my own windows. I put the widows on the bathroom side because I put cabinets at the foot ends, the feet go under the cabinets.
|
If you want something done right, do it yourself.
2011 RP172, 2016 Tundra 5.7 Litre, Ltd.
|
|
marwayne
Senior Member
Joined: 25 Oct 2011
Location: Edmonton AB Can
Online Status: Offline
Posts: 1002
|
Posted: 11 Jan 2017 at 2:17pm |
Pic. # 1 cabinets at foot end. Pic. # 2 head end. Pic # 3 window in bathroom.
|
If you want something done right, do it yourself.
2011 RP172, 2016 Tundra 5.7 Litre, Ltd.
|
|
furpod
Moderator Group - pHp
Joined: 25 Jul 2011
Location: Central KY
Online Status: Offline
Posts: 6128
|
Posted: 11 Jan 2017 at 3:13pm |
Huron Sailor has a write up about his portholes that open, try searching for his posts..
|
|
mountainman
Newbie
Joined: 24 Apr 2016
Online Status: Offline
Posts: 24
|
Posted: 12 Jan 2017 at 11:34am |
Thanks for the pictures and porthole lead guys.
|
|