Super Slide Tube Install |
Post Reply | Page 12> |
Author | |
Tim
Groupie Joined: 22 May 2016 Location: Harrison Oh Online Status: Offline Posts: 47 |
Topic: Super Slide Tube Install Posted: 11 Apr 2017 at 10:21am |
Hope to install the Super Slide Tube for sewer hose this weekend. Where do you all suggest I mount the tube? Also, what size self tapping screws should I use? Thanks!!
|
|
2019 Coachman RBS192
2014 178 (sold) 2018 Silverado 1500 4X4 |
|
ronahue
Senior Member Joined: 02 Jun 2015 Location: Massachusetts Online Status: Offline Posts: 316 |
Posted: 11 Apr 2017 at 10:22am |
Check the box mine came with screws
|
|
Ron & Sharon
2015 R-Pod 179 2022 Nissan Frontier No trees were harmed in the sending of this message but a billion electrons were really agitated |
|
TheBum
Senior Member Joined: 26 Feb 2016 Location: Texas Online Status: Offline Posts: 1407 |
Posted: 11 Apr 2017 at 10:43am |
I mounted ours on the rear of our 179, almost like a bumper. I'll try to post pictures later.
|
|
POD WE R
Groupie Joined: 16 Feb 2017 Location: Arizona Online Status: Offline Posts: 42 |
Posted: 11 Apr 2017 at 11:24am |
I mounted my super slider tube on our 180 next to the fresh water tank. There is still enough space for my BAL Hide A Spare tire carrier.
E&M 2017 180 HRE 2011 Ram Dakota V6 Arizona
|
|
Tim
Groupie Joined: 22 May 2016 Location: Harrison Oh Online Status: Offline Posts: 47 |
Posted: 11 Apr 2017 at 1:16pm |
Thanks for the tips... I did't get any screws Ron.
|
|
2019 Coachman RBS192
2014 178 (sold) 2018 Silverado 1500 4X4 |
|
CharlieM
Senior Member Joined: 23 Nov 2012 Location: N. Colorado Online Status: Offline Posts: 1797 |
Posted: 11 Apr 2017 at 2:17pm |
The tube should be mounted crosswise under the Pod. Use #12 stainless steel hex head sheetmetal screws with SS washers. Predrill the holes and do not twist too hard. SS is brittle and can twist off and break.
|
|
Charlie
Northern Colorado OLD: 2013 RP-172, 2010 Honda Pilot 3.5L 4WD PRESENT: 2014 Camplite 21RBS, 2013 Supercharged Tacoma 4L V6 4WD |
|
Whoababe
Newbie Joined: 14 Feb 2017 Location: Alabama Online Status: Offline Posts: 26 |
Posted: 20 Apr 2017 at 7:08pm |
We mounted our super slider on the rear of the frame, just behind the step. So far so good. Ours did not come with screws either. We pre-drilled, and used self drilling screws with washers. We used a 1/8" titanium drill bit for pilot holes. Good luck and happy camping!!
|
|
Tim
Groupie Joined: 22 May 2016 Location: Harrison Oh Online Status: Offline Posts: 47 |
Posted: 20 Apr 2017 at 7:24pm |
Thanks! I did the same thing. Going out tomorrow for the first time this year. Hope it does't fall off
|
|
2019 Coachman RBS192
2014 178 (sold) 2018 Silverado 1500 4X4 |
|
computerfixitguy
Groupie Joined: 04 Jun 2016 Location: Littleton, CO Online Status: Offline Posts: 91 |
Posted: 14 May 2017 at 2:42pm |
Can the supertube be mounted directly into the deck and not the frame? In the same picture above I want to mount the tube essentially outside the frame from front to back. I bought 2 of the tubes one for the sewer hose and one for fishing rods.
So can I screw into the floor or do I have to run bolts all the way through? Derek
|
|
Kim & Derek
2016.5 176t 2015 Jeep Rubicon JKU (trips west) 2008 Town and Country (trips east) 2 kids, 2 dogs |
|
bigcat
Groupie Joined: 25 Aug 2016 Online Status: Offline Posts: 51 |
Posted: 28 Jun 2017 at 4:58pm |
What length tube did y'all get. I have a 2017 179 if it makes any difference. I'd prefer to mount it toward the rear of the frame if at all possible.
Thanks!
|
|
Big Cat
2017 179 |
|
Post Reply | Page 12> |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |