Originally posted by GlibGuy
Originally posted by Iceworm
Was the controller the problem. I had a situation as you described and after checking voltages, tensioners at brake etc. Noticed a wire broke off of the crimped connector just a few inches outside of the brake housing. Fixed with butt splice connector and full brakes again. About a week later same thing happened to the second wire. Just got back from trip from Penna. to Alaska. I will cut the factory splices off the other brake and replace with butt splices sealed with silicone soon. |
I haven't completed my findings. I assumed it was the controller but sounds like I need to check for connections around the brake housing(s). I'll post results at some point. |
Well I ended up with a broken wire and more. I tried to repair the wire but ended up having to have a new wire run AND the electric brake assembly replaced on one side! I just returned from a 3600 mile trip and the brakes* worked perfectly.
*And everything else - almost two weeks of dry camping.