|
|
Post Reply 
|
| Author |
 Share Topic Printable Version Google Delicious Digg StumbleUpon Windows Live Yahoo Bookmarks reddit Facebook MySpace Newsvine Furl Topic Search  Topic Options
|
brownjen 
Newbie 
Joined: 27 Sep 2020 Location: Vermont Online Status: Offline Posts: 14 |
 Topic: How to access the Jensen radio in RP180Posted: 27 Sep 2020 at 2:04pm |
|
Any clues on how to access the back of the Jensen AWM968 radio in a RP180? One of the exterior speakers is not working and I'm guessing the place to start looking is the cable hookups on the back of the radio. Can't figure out how to access them however. Maybe just start unscrewing all the screws on the faceplate? Thought I might do well to ask first.
|
|
|
Ken in Vermont
|
|
 |
|
|
Pod People
Senior Member 
Joined: 22 Sep 2011 Location: Chapel Hill,NC Online Status: Offline Posts: 1068 |
Posted: 27 Sep 2020 at 4:55pm |
|
I don't know about your model, but ours is in the 179. I took the radio out by unscrewing the four square headed screws on the face plate. the screws are deeply recessed in each corner. when you unscrew the 4 screws, the entire radio will come out-not just a faceplate. It's a box about 5" deep with lots of short wires coming out the back. It's best to have a helper hold the radio while you work on it. I tried to prop it up on the top of a step ladder but could never get it out that far from the cabinet because of short wires. Hope this helps Vann
|
|
|
Vann & Laura 2015 RPod 179 
|
|
|
|
|
podwerkz
Senior Member
Joined: 11 Mar 2019 Location: Texas Online Status: Offline Posts: 966 |
Posted: 27 Sep 2020 at 5:13pm |
|
I would test that exterior speaker first.
|
|
|
r･pod 171 gone but not forgotten!
|
|
|
|
|
Colt
Senior Member
Joined: 16 Nov 2019 Online Status: Offline Posts: 383 |
Posted: 28 Sep 2020 at 12:54am |
|
Check the connections at the speaker first.
To access the rear of the radio, open the left most door To the cabinet above the dinette. There is a plate inside that is held in by one or 2 screws. Behind it is all the wiring. |
|
|
John
'16 R-Pod 180 |
|
|
|
|
lostagain
Senior Member
Joined: 06 Sep 2016 Location: Quaker Hill, CT Online Status: Offline Posts: 2588 |
Posted: 28 Sep 2020 at 9:59am |
|
+ 1 to checking the speaker connections first. We had a silent speaker and when I pulled it off, I found one of the wires was not plugged onto the spade lug on the speaker. When you pull off the speaker, be sure to have some dicor to reseal it. Silicone caulk doesn't work well for that purpose.
|
|
|
Never leave footprints behind.
Fred & Maria Kearney Sonoma 167RB Our Pod 172 2019 Ford F-150 4x4 2.7 EcoBoost |
|
|
|
|
brownjen
Newbie
Joined: 27 Sep 2020 Location: Vermont Online Status: Offline Posts: 14 |
Posted: 13 Oct 2020 at 9:19am |
|
Thanks for the suggestions. Indeed the speaker was not connected... However, even after I connected the wires it remained unresponsive. So... more work to do. I pulled the Jensen out far enough to see that the mass of wires was not as simple as my old sterio
 . I'm going to need some help, I'm afraid. Plus I discover that one of the two ceiling speakers inside the camper is not working. I switched the two interiors, and it's not the speaker -- it's the wiring, the connection, or the Jensen. As least I'm narrowing it down. Ken And thanks for the tip on the dicor.
|
|
|
Ken in Vermont
|
|
|
|
|
brownjen
Newbie
Joined: 27 Sep 2020 Location: Vermont Online Status: Offline Posts: 14 |
Posted: 13 Oct 2020 at 9:20am |
|
Got it! Thanks.
And all the wiring is right! Ken
|
|
|
Ken in Vermont
|
|
|
|
|
brownjen
Newbie
Joined: 27 Sep 2020 Location: Vermont Online Status: Offline Posts: 14 |
Posted: 13 Oct 2020 at 9:20am |
|
|
|
|
Ken in Vermont
|
|
|
|
|
Post Reply
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
How to access the Jensen radio in RP180