4Runner trailer connection Mod
Printed From: R-pod Owners Forum
Category: Non-pod Discussion Forums
Forum Name: Mods, Maintenance, Tips and Tricks
Forum Discription: Same as podmods, just... not for pods
URL: http://www.rpod-owners.com/forum_posts.asp?TID=12236
Printed Date: 27 Apr 2024 at 2:54pm
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com
Topic: 4Runner trailer connection Mod
Posted By: tony rpod 180
Subject: 4Runner trailer connection Mod
Date Posted: 23 Sep 2018 at 6:47pm
|
The factory trailer connection receptacle and bracket on the Toyota 4Runners makes no sense. It is located under the rear cargo compartment. I was tired of laying on the ground to plug in my trailer connector and also it kept coming disconnected while I was towing so I installed this bracket on my 2018 4Runner. You can use the factory mounting holes where the original bracket was installed. I also added two 1” spacers to locate the bracket below the bumper, there is just enough harness length also(had to remove clip from frame rail) I also drilled a new hole in the bracket so it would be parallel to the bumper. I ordered the bracket from etrailer.com for about $8-9 < ="" style="margin-bottom: 6px; font-size: 11px;">
http://www.forestriverforums.com/forums/attachment.php?attachmentid=187165&d=1537545508"> ------------- GMC Canyon/RPoder |
Replies:
Posted By: mcarter
Date Posted: 23 Sep 2018 at 6:58pm
|
Good job, makes sense Tony. ------------- Mike Carter 2015 178 " I had the right to remain silent, I just didn't have the ability." |
Posted By: mcarter
Date Posted: 24 Sep 2018 at 4:16pm
|
Tony,
There is a couple on this forum having same issues, looking for assist. I think member name is Laurazalla. SHe is posting with a 4 runner issue. Can you help? ------------- Mike Carter 2015 178 " I had the right to remain silent, I just didn't have the ability." |