Sharp corner on entry door...beware
Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: Podmods, Maintenance, Tips and Tricks
Forum Discription: Ask maintenance questions, share your podmods (modifications) and helpful tips
URL: http://www.rpod-owners.com/forum_posts.asp?TID=13033
Printed Date: 28 May 2024 at 12:56pm
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com
Topic: Sharp corner on entry door...beware
Posted By: Motor7
Subject: Sharp corner on entry door...beware
Date Posted: 13 Jul 2019 at 2:10pm
|
Just a heads up( I don't know if this has been mentioned before). The lower corner of my entry door had a very sharp corner which is part of the aluminium trim. I have risers on, so the door is quite high. I managed to get my knee under it while swinging it open and was awarded with a small razor like cut about an inch long. It could have been much worse.
I took a file to the corner and rounded it off in less than a min. So, take a look add your door and see it you also have the " swinging knee cutter" option  ------------- 2016 R-Pod 176T |