I need HELP!!!: Cant get cable to work.

Print Page | Close Window

Cant get cable to work.

Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: I need HELP!!!
Forum Discription: Perplexed/need help with a problem - ask here
URL: http://www.rpod-owners.com/forum_posts.asp?TID=13216
Printed Date: 07 May 2024 at 4:00pm
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com

Topic: Cant get cable to work.

Posted By: Monemkr2000
Subject: Cant get cable to work.
Date Posted: 06 Oct 2019 at 5:26pm

So I'm trying to get the cable to work. Ive hooked up the cable line from the pedestal to the POD. But when I go to scan for channels it's not picking any up. Is there a switch some where (2019 190 ) that I'm missing to get it to switch from the antenna. I thought the TV did the switch but maybe not??

-------------
"We must always be aware that suddenly and unexpectedly we may find ourselves in a role where our performance has ultimate consequences."

Replies:

Posted By: StephenH
Date Posted: 06 Oct 2019 at 6:26pm

When you are trying, do you have the antenna booster turned on or off? For cable viewing, it should be turned off. I have not tried it since we don't have cable, but that is what I have read. You may need to check the source the television is using also and change from antenna to cable, then you may need to scan for channels, but I am not sure about that.

Also, one other thing to check: See if the cable connection on the post is an active connection. It may be there, but may not have an actual signal going through it.

-------------
StephenH
Happy is the man that findeth wisdom,...

http://www.rpod-owners.com/forum_posts.asp?TID=7712 - ouR escaPOD mods
Former RPod 179
Current Cherokee Grey Wolf 24 JS

Posted By: Buckeye
Date Posted: 09 Oct 2019 at 7:44am

Happened to me when I connected to the cable port on the Pod (the one on the left) from the origin. Then I connected it to the aux port (the one on the right) and it worked.

-------------
Craig-retired teacher of the blind
Carol-retired legal admin asst
Spot and Sam-the miscreant Shih-tzus
"Politically incorrect with no real changes expected...”

Former 2017 Rpod 180
F150 5.0 4x4

Posted By: Monemkr2000
Date Posted: 10 Oct 2019 at 8:34pm

My R-pod only has one port. It says Cable/Satellite. Unless Im missing one somewhere. Did find a workaround. Just run the cable thru the slide out. Works until we get home and figure out what's going on.

-------------
"We must always be aware that suddenly and unexpectedly we may find ourselves in a role where our performance has ultimate consequences."