Print Page | Close Window

Wheel Bearings

Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: I need HELP!!!
Forum Discription: Perplexed/need help with a problem - ask here
URL: http://www.rpod-owners.com/forum_posts.asp?TID=13352
Printed Date: 29 Apr 2024 at 6:40am
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com


Topic: Wheel Bearings
Posted By: Woodmiester
Subject: Wheel Bearings
Date Posted: 14 Jan 2020 at 9:19am
Always like to travel with an extra  set of wheel bearings.  Does anyone know which bearing fits the 190?  (I imagine they are all the same).

-------------
Swampfox



Replies:
Posted By: offgrid
Date Posted: 14 Jan 2020 at 2:03pm
Its probably this kit you want but check the label on your axle and call etrailer to confirm.

https://www.etrailer.com/dept-pg-Trailer_Bearings_Races_Seals_Caps-co-3500_lbs_Axle.aspx - https://www.etrailer.com/dept-pg-Trailer_Bearings_Races_Seals_Caps-co-3500_lbs_Axle.aspx

You'll need to have a seal puller and bearing grease in your toolbox also of course.


-------------
1994 Chinook Concourse
1995 RV6A Experimental Aircraft
2015 Rpod 179 - sold


Posted By: jato
Date Posted: 14 Jan 2020 at 4:55pm
Offgrid is correct in the above kit that you will need.  After 8 years and 28,000 miles I made the choice to replace ours on the 177 a year ago.  It wasn't necessary but since it was already pulled apart I replaced them anyway, I was only out $20 for both sets of bearings and seals from the local auto parts store and timewise I spent 1 hour/hub, not a big deal.

-------------
God's pod
'11 model 177
'17 Ford F-150 4WD 3.5 Ecoboost
Jim and Diane by beautiful Torch Lake
"...and you will know the Truth and the Truth will set you free."


Posted By: DavMar
Date Posted: 14 Jan 2020 at 9:42pm
Originally posted by jato

Offgrid is correct in the above kit that you will need.  After 8 years and 28,000 miles I made the choice to replace ours on the 177 a year ago.  It wasn't necessary but since it was already pulled apart I replaced them anyway, I was only out $20 for both sets of bearings and seals from the local auto parts store and timewise I spent 1 hour/hub, not a big deal.


Jato, wish you would of taken photos and posted them and write up of replacing bearings. I believe it would help allot of Pod owners who are looking at doing the same now or later. It all sounds easy but we all know how easy goes sometimes! Star


-------------
Dave & Marlene J with Zoey the
wonder dog.
2017 Rpod 180
2016 Toyota Tacoma SR5 4x4
Lexington, NC



Print Page | Close Window

Bulletin Board Software by Web Wiz Forums® version 9.64 - http://www.webwizforums.com
Copyright ©2001-2009 Web Wiz - http://www.webwizguide.com