Table
Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: I need HELP!!!
Forum Discription: Perplexed/need help with a problem - ask here
URL: http://www.rpod-owners.com/forum_posts.asp?TID=13898
Printed Date: 03 May 2024 at 9:27pm
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com
Topic: Table
Posted By: Buckeye
Subject: Table
Date Posted: 11 Aug 2020 at 9:55pm
|
We lowered the table in our 180 to accommodate our nephew traveling with us. Are there any secrets for raising it? Seems to me that the black folding support should line up with the support on the front, not have an angle to it. Any help would be appreciated. ------------- Craig-retired teacher of the blind Carol-retired legal admin asst Spot and Sam-the miscreant Shih-tzus "Politically incorrect with no real changes expected...” Former 2017 Rpod 180 F150 5.0 4x4 |
Replies:
Posted By: mjlrpod
Date Posted: 12 Aug 2020 at 9:11am
|
I recall the first time I tried to raise my table, I found it confussing. I think you need to pull out the little slide plunger under neath the table, and then pull straight out, not up. It works on a hinge that won't let it go straight up. It's been awhile since I have done it (I sold it), but I think this is correct. ------------- 2017.5 Rp-172 2020 R-pod 195 2015 Frontier sv 4.0L 6cyl I'll be rpodding |
Posted By: StephenH
Date Posted: 12 Aug 2020 at 9:14am
|
Yes, it rotates around the center pivot point. On ours, I had to pull the pin, then pull it toward the end with the pin and then it would start pivoting up until it locked at the top. I changed ours out for two pillars (see my mods for details) and am much happier with that arrangement.
------------- StephenH Happy is the man that findeth wisdom,... http://www.rpod-owners.com/forum_posts.asp?TID=7712 - ouR escaPOD mods Former RPod 179 Current Cherokee Grey Wolf 24 JS |
Posted By: tcj
Date Posted: 12 Aug 2020 at 9:37am
|
It's like expanding a parallelogram. You have to pull the top of the table away from the wall while raising it. The release catch is angled on the end so the arm can slide past it. Did that make sense? You don't have to pull the release knob to raise the table, just to lower it.     ------------- 2018 R-pod 180 Hood River Edition |
Posted By: StephenH
Date Posted: 12 Aug 2020 at 10:34am
|
Thanks. I had not used mine in a while so I forgot that it was only to lower that pulling the catch was needed.
------------- StephenH Happy is the man that findeth wisdom,... http://www.rpod-owners.com/forum_posts.asp?TID=7712 - ouR escaPOD mods Former RPod 179 Current Cherokee Grey Wolf 24 JS |
Posted By: crw8sr
Date Posted: 14 Aug 2020 at 6:46pm
|
We don't use our table at all. It's heavy and awkward. We found a table similar to a TV tray but bigger. ------------- Chuck & Lyn Izzy, Morkie. RIP Zoe Joy & Gracie, Yorkie 2018 R Pod 190 2019 Traverse In moments of adversity;when life's a total wreck, I think of those worse off than me and really feel like heck. |