Brake/Signal lights
Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: Podmods, Maintenance, Tips and Tricks
Forum Discription: Ask maintenance questions, share your podmods (modifications) and helpful tips
URL: http://www.rpod-owners.com/forum_posts.asp?TID=14744
Printed Date: 04 May 2024 at 1:17pm Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com
Topic: Brake/Signal lights
Posted By: pedwards2932
Subject: Brake/Signal lights
Date Posted: 17 Jun 2021 at 12:56pm
I had an issue with my right turn signal.....it would work for a while then fail. My Escape gives a warning when the lights aren't working. I thought it was a faulty plug or connection. My 7 pin outlet used the 4 pin trailer plug that came with the Escape to power up the brake/signal lights. I cut out the plug and spliced it all together thinking that would give a better connection.....no dice. I then took a 12v test light and determined I was getting signal light thru car plug and then thru the Hayes anti sway unit. There was a junction box that I assume was factory but may have been owner installed. I pulled the cover and found some really loose connections. When I checked thru all the connections were loose, not sure if this happened from road vibration but doubtful. I tightened all the connections and turn signal works fine....probably will help charging system as well. Just a heads up that if you have that junction box the terminal connections need to be checked.
|
|