Bearing /seals numbers
Printed From: R-pod Owners Forum
Category: R-pod Discussion Forums
Forum Name: Podmods, Maintenance, Tips and Tricks
Forum Discription: Ask maintenance questions, share your podmods (modifications) and helpful tips
URL: http://www.rpod-owners.com/forum_posts.asp?TID=6954
Printed Date: 18 May 2024 at 8:13pm
Software Version: Web Wiz Forums 9.64 - http://www.webwizforums.com
Topic: Bearing /seals numbers
Posted By: Craneman
Subject: Bearing /seals numbers
Date Posted: 14 Sep 2015 at 5:05pm
|
can anyone give me the bearing and seal numbers for my prod 2010 174. Moe ------------- Jo and Gary, 2010-174,2011 F150 
Jo and Gary 2010 174 2011 Ford 150 |
Replies:
Posted By: Pod People
Date Posted: 14 Sep 2015 at 6:19pm
|
We have a 173 and I assume the axle/hubs are the same. we used Car Quest part # 473336 for the dust seals. They were 47.34 each. We did not replace the bearings during the service. Hope this helps. Travel safe Vann ------------- Vann & Laura 2015 RPod 179 https://postimg.cc/0zwKrfB9"> 
|
Posted By: furpod
Date Posted: 14 Sep 2015 at 7:21pm
|
I certainly hope that's a typo, I picked up complete bearing kits at NAPA for less than the price of the seal you quoted..
------------- |
Posted By: Podster
Date Posted: 15 Sep 2015 at 6:59am
|
I sure hope so as well. I paid less than $3.00 per seal direct from Lippert. ------------- Cliff & Raelynn Ranger 4.0/178 (1/2 ton 5,800lb tow capacity) |
Posted By: Pod People
Date Posted: 15 Sep 2015 at 8:36am
|
Yes, it was a mistake . A BIG mistake!!. the "4" should have been a "$" I didn't hit the shift key properly. . I guess my fingers aren't as smart as I would like for them to be. the actual cost was $7.34 for 2 seals. Vann ------------- Vann & Laura 2015 RPod 179 https://postimg.cc/0zwKrfB9">
|