The factory trailer connection receptacle and bracket on the Toyota 4Runners makes no sense. It is located under the rear cargo compartment.
I was tired of laying on the ground to plug in my trailer connector and also it kept coming disconnected while I was towing so I installed this bracket on my 2018 4Runner. You can use the factory mounting holes where the original bracket was installed. I also added two 1” spacers to locate the bracket below the bumper, there is just enough harness length also(had to remove clip from frame rail) I also drilled a new hole in the bracket so it would be parallel to the bumper. I ordered the bracket from etrailer.com for about $8-9
< ="" style="margin-bottom: 6px; font-size: 11px;">