Tire rubbing fender . Looking for advice |
Post Reply | Page <1234> |
Author | |
GlueGuy
Senior Member Joined: 15 May 2017 Location: N. California Online Status: Offline Posts: 2629 |
Topic: Tire rubbing fender . Looking for advice Posted: 26 Apr 2019 at 9:41am |
|
|
bp
2017 R-Pod 179 Hood River 2015 Ford F150 SuperCrew 4WD 3.5L Ecoboost |
|
john in idaho
Senior Member Joined: 04 Nov 2014 Location: Eagle Idaho Online Status: Offline Posts: 611 |
Posted: 27 Apr 2019 at 9:22am |
On my 179, the slide side has the fender mounted flush with the bottom of the trailer. The other side has the fender mounted flush with the top edge of the kedder rail. About an inch difference.
|
|
GlueGuy
Senior Member Joined: 15 May 2017 Location: N. California Online Status: Offline Posts: 2629 |
Posted: 27 Apr 2019 at 9:25am |
Maybe it's the difference between HRE and non-HRE?
|
|
bp
2017 R-Pod 179 Hood River 2015 Ford F150 SuperCrew 4WD 3.5L Ecoboost |
|
StephenH
podders Helping podders - pHp Joined: 29 Nov 2015 Location: Wake Forest, NC Online Status: Offline Posts: 6288 |
Posted: 27 Apr 2019 at 11:13am |
Also depends on whether there is a keder rail or not. Mine does not so the fender is mounted the same on both sides.
|
|
StephenH
Happy is the man that findeth wisdom,... ouR escaPOD mods Former RPod 179 Current Cherokee Grey Wolf 24 JS |
|
offgrid
Senior Member Joined: 23 Jul 2018 Online Status: Offline Posts: 5290 |
Posted: 27 Apr 2019 at 11:34am |
My 2015 Non-HRE 179 has the keder rail but it is not continuous, allowing the fenders to be the same height on both sides. So it looks like there are at least three different versions?
I was under the impression that Tent2pod's 1 inch side to side difference was to the trailer frame not to the fender but can you confirm?
|
|
1994 Chinook Concourse
1995 RV6A Experimental Aircraft 2015 Rpod 179 - sold |
|
GlueGuy
Senior Member Joined: 15 May 2017 Location: N. California Online Status: Offline Posts: 2629 |
Posted: 27 Apr 2019 at 12:39pm |
Ours has the keder rail on the curb side, but there is a piece of trim under the slide out that is about the same width as the keder rail. The fender is mounted just a "skosh" above that trim piece.
|
|
bp
2017 R-Pod 179 Hood River 2015 Ford F150 SuperCrew 4WD 3.5L Ecoboost |
|
john in idaho
Senior Member Joined: 04 Nov 2014 Location: Eagle Idaho Online Status: Offline Posts: 611 |
Posted: 27 Apr 2019 at 12:51pm |
Sounds like the position of the fender depends on who was building trailers that day. Ours is a west coast HRE .
|
|
tent2pod
Newbie Joined: 13 Mar 2019 Location: Western pa Online Status: Offline Posts: 9 |
Posted: 27 Apr 2019 at 6:31pm |
I was under the impression that Tent2pod's 1 inch side to side difference was to the trailer frame not to the fender but can you confirm?
[/QUOTE]
Offgrid , I have it sitting on a cement floor . I checked air pressure in both tires making sure they are the same . Then measuring from the floor to the trailer right in front of each fender and at the back of each fender.
|
|
offgrid
Senior Member Joined: 23 Jul 2018 Online Status: Offline Posts: 5290 |
Posted: 28 Apr 2019 at 5:33am |
Are your fenders the same height relative to the trailer frame? Put another way, is the 1 inch height difference entirely attributed to the axle or is part of it the placement of the fenders?
|
|
1994 Chinook Concourse
1995 RV6A Experimental Aircraft 2015 Rpod 179 - sold |
|
tent2pod
Newbie Joined: 13 Mar 2019 Location: Western pa Online Status: Offline Posts: 9 |
Posted: 28 Apr 2019 at 12:04pm |
The fenders appear to be the same height relative to the trailer frame . |
|
Post Reply | Page <1234> |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |